E-mail: sales@zh-leddriver.com
Tel: +86-755-23591578
Contact Us
Shenzhen Zhihe Xingye Electronics Co.,Ltd
Add:3th Floor,A Building,Ming Jinghai second industrial zone,Zhoushi Road Shiyan Town,Baoan District,Shenzhen China
Tel:0755-23591578
Fax:0755-23598866
Ph:18566662362
E-mail:sales@zhxyled.com
Home > News > Content

2016 ZOHO POWER FAIRS

IP65 LED Flood Driver For Special Differences

Oct 31, 2017

LED floodlight is a point of light can be uniformly illuminated in all directions, its range of illumination can be adjusted in the scene as a positive octahedral display. Floodlights are the most widely used light source in effect making, and standard floodlights are used to illuminate the entire scene.IP65 LED Flood Driver 

Multiple floodlights can be used in the scene to produce better results. Floodlight is the most widely used in the effect of a light source, the scene can be used to coordinate the role of multiple floodlights to the birth of a better effect. Is a uniform point from a specific direction to illuminate objects in all directions.IP65 LED Flood Driver

Try to use the series LED form, because LED flood light voltage difference is special. Ordinary LED peak current is maintained at 80 mA, the reverse voltage in the 6V up and down, in the LED application should pay attention to the design of the circuit when the peak voltage and current under this limit. Welding with a voltage of less than 25 watts, the soldering iron temperature control at 300 degrees Celsius in the high temperature under the exposed SMD LED, do not squeeze its epoxy part, or wipe with a sharp object, because the LED lights are very fragile, Easy to damage, welding time 3 seconds.IP65 LED Flood Driver

In addition to the DC voltage, a high-voltage pulse must be provided to excite the plasma in the bulb, producing high-intensity arcs between the two electrodes. The pulse amplitude depends on the type of bulb used in the system, ranging from a lower of 1.6kV to 10kV.IP65 LED Flood Driver 

The micro xenon lamp is triggered by a 1.6 kV / 5μs pulse applied to the third external electrode of the lamp, which is generated by connecting the dedicated pulse transformer shown in Fig. 2 to the high voltage capacitor. The capacitor is charged to the flash DC voltage (200V) and is suddenly discharged to the lower end of the pulse transformer after the trigger button S1. From the secondary high voltage applied to the bulb (on the outer surface), the flash is excited.IP65 LED Flood Driver