E-mail: sales@zh-leddriver.com
Tel: +86-755-23591578

220W IP67 Round Driver

If you are planning to buy high-quality CE certification 220W ip67 round driver at low price from one of the professional China 6a outpurt constant current driver, wateproof constant current led driver, 200w round driver, 250w constant current round power, 220w round power supply manufacturers,...

Send Inquiry
220W IP67 Round Driver

If you are planning to buy high-quality CE certification 220W ip67 round driver at low price from one of the professional China 6a outpurt constant current driver, wateproof constant current led driver, 200w round driver, 250w constant current round power, 220w round power supply manufacturers, please feel free to contact Zhihe Xingye Electronics Co.,Ltd.

220W 36V  Constant Voltage LED Driver ZH-HBG-220 Waterproof IP67 Round Shape SMPS
Features:

Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
Protections: Short circuit /Over current /Over voltage /Over temperature
OCP point adjustable through Output Cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Suitable for dry / damp / wet locations
3 years warranty, Tc70℃ 40000hrs
Model Series:
ZH-HBG-220-24() / HBG-220-36() / HBG-220-48() /HBG-220-60() 
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output constant current level can be adjusted through internal potentiometer.
B : IP67 rated. output constant current lever can be adjusted through output cable with 1-10V,PWM signal and Resistance 
E(option) : IP67 rated. Can be fixed by steel support.
Parameter

Model HBG-220H-24 HBG-220H-30 HBG-220H-36 HBG-220H-42 HBG-220H-48 HBG-220H-54 Non-standard type
Output DC voltage 24V 30V 36V 42V 48V 54V 55-220V
Rated current 8.4A 7A 6.1A 5.2A 4.6A 4.1A 0.5-2.4A
Rated power 201W 210W 220W 218.4W 220.8W 221.4W 220W
Ripple&Noise 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p MAX 500mVp-p
Output voltage 18-24V 20-30V 26-36V 30-42V 36-48V 42-54V Customized
Output current Can be adjusted by internal potentiometer(Only A)
4-8.4A 3.5-7A 3-6.1A 2.5-5.2A 2.3-4.6A 2-4.1A Customized
Voltage tolerance 1% 1% 1% 1% 1% 1% 1%
Line Regulation 0.50% 0.50% 0.50% 0.50% 0.50% 0.50% 1%
Load Regulation 0.50% 0.50% 0.50% 0.50% 0.50% 0.50% 1%
Starting Time

2500ms,50ms(@full load)230VAC/115AC;

B model:2500ms,200ms(@full load)230VAC/115AC;

Hold-up Time(Typ) 10ms@full load  230VAC/115VAC
Input Input voltage 100-277VAC OR 130-420VDC
Frequency range 47-63HZ
Power Factor(Typ) PF>0.98 115VAC, PF>95 230VAC, PF>0.93VAC 277VAC @full load
Efficiency(Typ) >88% >88% >89% >89% >90% >90% >90%
AC current(Typ) 1.4A/115VAC,    0.6A/230VAC ,   0.55A/277VAC

Input inrush

current(Typ)

(cold start)<50A /230VAC
Leakage Current <0.75MA/277VAC
Protection

Output Over-

current protection

OCP point95-105%

When the output current is over,

Return to normal status when output limit current to get right.

Short Circuit

Protection

The input power shall decrease when the output rail short,

the power supply shall no damage,

and shall be self-recovery when the fault condition is removed

Over Voltage 28-34V 34-40V 42-50V 48-56V 54-64V 60-67V Customized

When the output voltage is over,

the products is protected such as hiccup or when it is at 

the highest point of output voltage the product would not 

be hurt when the fault is excluded or is start working again.

Over Temperature 85℃±10℃,start

85℃ automatic recovery,Derating Mode .

When temp reach 95℃,The Max current will decline 40%

Environment

Operatin

gTemperature

-40---+70℃

Relative operation

Humidity

20-95%RH

Relative Storage 

Humidity

-40-+80℃,10-95%RH

Max temperature

Rise

+30℃ Without wind open environment, the highest temperature of the shell.
Vibration 10-500HZ,5G 12minutes per cycle for each axis(X,Y,Z)
Safety Standards&EMC

Safety

Standards

EN 61347-1:2008+A1:2011+A2:2013, EN 61347-2-13:2006, EN 62493:2010

Dielectric 

Strength(Hi-pot)

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

Insulation 

Resistance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/70%RH
EMC Emission EN55015,EN55022(CISPR22),Class B,EN61000-3-2:2006+AA:2009 (≥70%@ full load)
EMC immunity EN55024-A ,EN61000-3-3:2013
Others MTBF ≥150Khrs MIL-HDBK-218F(25℃)
Size 152mm*52.5mm
Package carton
Note
  1. All parameters NOT specially mentioned are measured at 230VAC input,

    rated load and 25°C of ambient temperature.

2.Ripple & noise are measured at 20MHz of bandwidth by using 

a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3.Tolerance: includes set up tolerance, line regulation and load regulation.

4.Constant current operation region for LED related applications,

but please reconfirm special electrical requirements for some specific system design.

5.Derating may be needed under low input voltages.

Please check the static characteristics for more details.

6.Length of set up time is measured at cold first start.

Turing ON/OFF power supply may lead to increase of the set up time.

7.The power supply is considered as a component that will be

operated in combination with final equipment.

Since EMC performance will be affected by the complete installation,

the final equipment manufacturers must re-quality EMC Directive on the complete installation again.

8.To fulfill requirements of the latest ErP regulation for lighting fixtures,

this LED power supply can only be used behind a switch without permanently.

Size(:mm)

Blank:(ZH-HBG-220H)


Certifications

Package



Related Products
Leave Message
Your privacy is important to us - we never sell or share your information.